: Seamless plug-and-play operation with Infineon’s miniWiggler, DAS (Device Access Server) architecture, and standard JTAG/DAP debug probes.
Flashing a compiled binary to a target microcontroller using the Memtool 4.9 graphical user interface follows a structured technical workflow. 1. Project Configuration infineon memtool 4.9
Memtool.exe /device XC878 /com 3 /baud 115200 /erase /program firmware.hex /verify /exit Project Configuration Memtool
Infineon Memtool 4.9 is a capable, free tool for on-chip flash programming that serves the needs of many embedded developers. Its extensive device support, essential memory operations, and user-friendly interface make it an excellent choice for prototyping and evaluation. While it has limitations compared to the commercial UDE Memtool, it remains one of the most accessible ways to program Infineon microcontrollers. Supports on-board debuggers (Wiggler) as well as external
Supports on-board debuggers (Wiggler) as well as external debuggers, such as the Infineon miniWiggler.
| Target Pin | USB-to-UART | Notes | |------------|-------------|-------| | P0.14 (BSL) | TXD | Connect via 1k resistor | | P0.15 (RxD) | RXD | Direct connection | | VDD | 3.3V or 5V | Match target voltage | | VSS | GND | Common ground |