Mikrotik L2tp Server Setup [portable] Full [HOT • 2026]

If you are reading a guide or watching a video, check for these that indicate the guide is low quality:

You must allow L2TP and IPsec traffic through the router's input chain. : IP > Firewall > Filter Rules Command : mikrotik l2tp server setup full

For the VPN to function, the router must allow L2TP and IPsec traffic through its firewall. Add these rules under IP > Firewall > Filter Rules : Description udp 1701, 500, 4500 accept L2TP & IPsec Traffic input ipsec-esp accept Encapsulating Security Payload 6. Client-Side Connection To connect from a Windows or Mobile device: Set VPN Type to "L2TP/IPsec with pre-shared key". Enter the Public IP or DDNS of your MikroTik router. Input the Pre-shared key (IPsec Secret). If you are reading a guide or watching

Enter the from the PPP Secrets section. MikroTik L2TP VPN Setup - Cloud Brigade Client-Side Connection To connect from a Windows or

This comprehensive guide will walk you through the full configuration of an L2TP/IPsec VPN server on MikroTik RouterOS, covering IP pool creation, user profiles, firewall rules, and client testing. Prerequisites Before starting the configuration, ensure you have: A MikroTik router running RouterOS (v6 or v7). Administrative access via Winbox or WebFig.

/interface l2tp-server server set enabled=yes default-profile=L2TP_Profile use-ipsec=required ipsec-secret=MySecurePSK Use code with caution. Copied to clipboard