In the field, click the folder icon, paste or browse to the location of the .hex file, and click OK .
: Community-maintained sensor libraries that may include the HX711 can be found on GitHub - Proteus Sensor Library
| Problem | Solution | |---------|----------| | Component not found after copying | Restart Proteus completely | | "Unknown part" error | Ensure both .IDX and .LIB are in the correct folder | | Simulation stuck | Add pull-up resistors (10kΩ) on DOUT and PD_SCK if needed | | No output | Check VSUP and GND connections |
[+5V] --------- [VCC] [GND] --------- [GND] [LOAD CELL] --------- [Input A+/A-] ---> [ HX711 ] ---> [DOUT] ---> Arduino Pin 2 [ IC ] ---> [PD_SCK] -> Arduino Pin 3 Open Proteus and create a new project.
Click and press the Play button at the bottom left of Proteus to start the simulation. Vary the potentiometer to see the weight values update live on the LCD screen.
SAVE UP TO 67% OFF
Hx711 Proteus Library Download Work
In the field, click the folder icon, paste or browse to the location of the .hex file, and click OK .
: Community-maintained sensor libraries that may include the HX711 can be found on GitHub - Proteus Sensor Library hx711 proteus library download
| Problem | Solution | |---------|----------| | Component not found after copying | Restart Proteus completely | | "Unknown part" error | Ensure both .IDX and .LIB are in the correct folder | | Simulation stuck | Add pull-up resistors (10kΩ) on DOUT and PD_SCK if needed | | No output | Check VSUP and GND connections | In the field, click the folder icon, paste
[+5V] --------- [VCC] [GND] --------- [GND] [LOAD CELL] --------- [Input A+/A-] ---> [ HX711 ] ---> [DOUT] ---> Arduino Pin 2 [ IC ] ---> [PD_SCK] -> Arduino Pin 3 Open Proteus and create a new project. Vary the potentiometer to see the weight values
Click and press the Play button at the bottom left of Proteus to start the simulation. Vary the potentiometer to see the weight values update live on the LCD screen.