Copy the extracted .bin file directly to the of your USB drive. Do not place it inside any folders. Safely eject the USB drive from your computer. Step 3: Execute the Firmware Flash on the Device Power off the Satlink WS-6979 using the main power toggle.
: Modern hardware iterations of the WS-6979 support 10-bit color depth. Upgrading ensures the internal decoder properly registers newer H.265/HEVC channels without pushing them incorrectly to the radio list. satlink ws6979 software upgrade free
while the progress bar loads. The meter will automatically reboot once the installation is successful. Step 4: Factory Reset and Verification Copy the extracted
Follow these steps carefully to ensure a successful firmware installation via USB. Prerequisites A USB flash drive (Formatted to ). Step 3: Execute the Firmware Flash on the
If the progress bar halts for more than 15 minutes, the file transmission may have corrupted. Do not switch off the power immediately if possible; instead, verify if the device responds to a menu escape. If forced to power cycle and the device fails to boot, you may need an RS232 null-modem serial cable to perform a recovery flash via a computer upgrade tool. Conclusion
