Multi Timer 181 5 Manual: Diehl

: Synchronous motor drive with captive segment trippers. Dial Capacity : 24-hour continuous cycling. Switching Resolution : 15-minute programmable intervals. Current Rating : Typically 16A resistive load at 230V AC.

: Press the h button repeatedly until the display shows the correct hour. If using a 12-hour variant, look for the PM indicator to ensure proper synchronization. diehl multi timer 181 5 manual

If the timer becomes unresponsive, some models have a small "Clear" or "Reset" hole that can be pressed with a paperclip. : Synchronous motor drive with captive segment trippers

| Problem | Possible Cause(s) and Solution(s) | | ------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | Timer does not turn the load ON or OFF at the correct time. | Incorrectly programmed switching points. Check the programmed times and their assigned days of the week. | | Time and day of the week are incorrect after a power cut. | Power failure exceeded the buffer time (minimum 5 minutes). Re-set the current time and day. | | The "1" or "2" indicator is flashing. | The channel has been manually deactivated using the skip function. Reactivate the channel by setting the left-hand slide switch to AUTO and, if necessary, pressing the skip button again. | | Load stays permanently ON or OFF. | The timer might be in a manual override mode or not in AUTO / RUN . Check that both slide switches are correctly set for automatic operation ( AUTO and RUN ). The timer may have lost its program due to an extended power failure beyond its backup capacity, requiring reprogramming. | Current Rating : Typically 16A resistive load at 230V AC

15 minutes for analog segments; 1 minute for digital models