Xycd60 Manual →
| Goal | Recommended Action | | :------------------------------------ | :-------------------------------------------------- | | Protect a battery from overcharging | Use , charger on IN, battery on OUT | | Protect a battery from over‑discharge | Use P‑2 (Discharging Mode) , battery on IN, load on OUT | | Stabilise a system with voltage bounce | Increase dOP (delay‑on time) to 60–120 seconds | | Prevent false load disconnection | Enable FOP (forced‑on time) set to 3–5 seconds (discharge mode only) | | Use as a standalone charger | ❌ Not possible – the XY‑CD60 is a voltage‑controlled switch, not a charger | | Control a solar panel directly | ❌ Not possible – the XY‑CD60 cannot regulate charge current; it requires a dedicated charge controller |
This comprehensive guide serves as a complete resource to help you understand both of the primary devices that use the "XYCD60" label, providing detailed instructions for the most common and an overview of the Battery Charge Controller module. xycd60 manual
The is a versatile digital battery charging and discharging controller module designed to manage battery health by preventing overcharging and over-discharging . It is commonly used in DIY electronics, solar power setups, and battery maintenance systems. Core Functionality Core Functionality When OP is set to any
When OP is set to any value greater than 00:00 , the module will turn the relay off automatically when the timer expires, regardless of whether the voltage limit (UP) has been reached. This is useful as a safety backup to prevent unlimited charging if the battery has a fault and cannot reach UP. ) and opens (stops charging) when it reaches
Here’s a general for a device labeled XY-CD60 (commonly a programmable digital voltage / current control module, often used for battery charging, power supply control, or over/under voltage protection).
) and opens (stops charging) when it reaches the upper limit ( Discharging Mode (
The relay closes and charging begins when the battery voltage drops to or below the Lower Limit (dn) Deactivation: