Press again to cycle to "MINUTE" and "WEEK DAY," using the arrow buttons to adjust each. Press SET one final time to save and exit the clock mode. Programming ON/OFF Cycles
Press SET again to move to "1 OFF." Use UP / DOWN to set the hour and minute for the timer to shut off. Repeat: You can repeat this process for programs 2, 3, etc. chevron digital timer ew-32 pdf
Plug the timer into a live wall outlet for at least 30 to 60 minutes. The internal battery requires a baseline charge to power the LCD screen and memory chips while unplugged. 2. Performing a Hard Reset Press again to cycle to "MINUTE" and "WEEK
Before programming the Chevron EW-32, familiarize yourself with its physical button layout and display indicators. Repeat: You can repeat this process for programs 2, 3, etc
Puts the timer under the control of your programmed schedules.
To ensure your programmed schedules run accurately, you must first set the internal clock to your local time.
In the event of an experiment reaching critical failure, the EW-32 timer is to be activated. The timer will initiate a controlled shutdown sequence, preventing a catastrophic explosion.